Log > system log, System log, Chapter 4 – Cisco 4-Port SSL/IPSec VPN Router RVL200 User Manual

Page 55: Advanced configuration

Advertising
background image

Chapter 4

Advanced Configuration

4

4-Port SSL/IPSec VPN Router

SNMPv3

Select this option if you want to use SNMPv3. Then

configure the following:

User Name

Enter the name of the user who receives

SNMP notifications.

Security Level

Select No Authentication if no

authentication or privacy security levels are specified.

Select Authentication if SNMP message origins are

authenticated. Select Privacy SNMP messages are

authenticated and encrypted.
Click Add to List, and configure as many entries as you

would like, up to a maximum of 10.

SNMPv1,2 Table

The SNMPv1,2 entries are listed. To delete an entry, select

it and click Delete.

SNMPv3 Table

The SNMPv3 entries are listed. To delete an entry, select it

and click Delete.
Click Save Settings to save your changes, or click Cancel

Changes to undo them.

Log > System Log

Configure the Router’s log settings, so you can specify

how you want its activity logs handled.

Log > System Log

System Log

Syslog

Syslog is a standard protocol used to capture information

about network activity. The Router supports this protocol

and can send its activity logs to an external server.

Enable Syslog

Select this option to enable the Router’s

Syslog feature.

Syslog Server

In addition to the standard event log,

the Router can send a detailed log to an external Syslog

server. The Router’s Syslog captures all log activities and

includes this information about all data transmissions:

every connection source and destination IP address, IP

service, and number of bytes transferred. Enter the Syslog

server name or IP address. Click Save Settings to save

your changes, and then restart the Router for the changes

to take effect.

E-mail

You may want logs or alert messages to be e-mailed to

you. If so, then configure the E-mail settings.

Enable E-Mail Alert

Select this option to enable the

Router’s E-Mail Alert feature.

Mail Server

If you want any log or alert information

e-mailed to you, then enter the name or numerical IP

address of your SMTP server. Your ISP can provide you

with this information.

Send E-mail to

Enter the e-mail address that will

receive your log files. If you do not want copies of the log

information e-mailed to you, then leave this field blank.

Enable E-Mail Authentication

Select this option to

enable the Router’s E-Mail Authentication feature.

User Name

Enter the user name for authentication.

Password

Enter the password for authentication.

Log Queue Length

You can designate the length of the

log that will be e-mailed to you. The default is 0 entries,

so unless you change this setting, the Router will e-mail

the log to you when there are more than 50 log entries.

Log Time Threshold

You can designate how often the

log will be e-mailed to you. The default is 0 minutes, so

unless you change this setting, the Router will e-mail the

log to you every 10 minutes.
The Router will e-mail the log every time the Log Queue

Length or Log Time Threshold is reached.

E-mail Log Sorting

Logs have different severity levels.

The higher the severity level, the more critical the log is

(the highest level is Severity0_Emergency). Select the

minimum severity level of logs that are e-mailed. Log

events with equal or higher severity level will also be

Advertising