Appendix c: bandwidth management, Overview, Creation of new services – Cisco 4-Port SSL/IPSec VPN Router RVL200 User Manual

Page 72: Overview creation of new services, Appendix c, Bandwidth management

Advertising
background image

4

Bandwidth Management

4-Port SSL/IPSec VPN Router

Appendix C

Appendix C:

Bandwidth Management

Overview

This appendix explains how to ensure Quality of Service

(QoS) on Vonage Voice over Internet Protocol (VoIP)

phone service. This example uses Vonage; however, similar

instructions will apply to other VoIP services.

Creation of New Services

Create two new services, Vonage VoIP and

Vonage 2.

Visit Vonage’s website at http://www.vonage.com.

Find out the ports used for Vonage VoIP service.
Access the Router’s web-based utility. (Refer to

“Chapter 4: Advanced Configuration” for details.)
Click the QoS tab.
On the Bandwidth Management screen, click Service

Management.

QoS > Bandwidth Management

On the Service Management screen, enter a name, such

as Vonage VoIP, in the Service Name field.

1.

2.

3.
4.

5.

Add Vonage VoIP Service

From the Protocol drop-down menu, select the

protocol the VoIP service uses. For example, some VoIP

devices use UDP.
Enter its SIP port range in the Port Range fields. For

example, you can set the Port Range to 5060 to 5070

to make sure that all active ports are covered.
Click Add to List.
Add a second service. Enter a name, such as Vonage 2,

in the Service Name field.

Add Vonage 2 Service

From the Protocol drop-down menu, select UDP.
Enter the RTP port range in the Port Range fields. These

are required for both incoming and outgoing traffic.

For example, you can set the Port Range to 10000 to

25000 to make sure that all active ports are covered.
Click Add to List.
Click Apply to save your changes.

6.

7.

8.
9.

10.
11.

12.
13.

Advertising