Setup > upnp, Upnp, Chapter 4 – Cisco 4-Port SSL/IPSec VPN Router RVL200 User Manual

Page 23: Advanced configuration

Advertising
background image

Chapter 4

Advanced Configuration



4-Port SSL/IPSec VPN Router

Some Internet applications or games use alternate ports

to communicate between the server and LAN host. When

you want to use these applications, enter the triggering

(outgoing) port and alternate incoming port in the

Port Triggering table. Then the Router will forward the

incoming packets to the LAN host.

Application Name

Enter the name of the application.

Trigger Port Range

Enter the starting and ending port

numbers of the trigger port range.

Incoming Port Range

Enter the starting and ending port

numbers of the incoming port range.
Click Add to List, and configure as many entries as you

would like, up to a maximum of 30. To delete an entry,

select it and click Delete selected application.
Click Show Tables to see the details of your entries. The

Port Range Forwarding Table List appears.

Port Range Forwarding Table List

Port Range Forwarding

Select this option to view the

Port Range Forwarding entries.

Port Triggering

Select this option to view the Port

Triggering entries.
Click Refresh to update the on-screen information. Click

Close to exit this screen and return to the Forwarding

screen.
On the Forwarding screen, click Save Settings to save your

changes, or click Cancel Changes to undo them.

Setup > UPnP

Universal Plug and Play (UPnP) can be used to set up public

services on your network. When the UPnP function is

enabled, Windows XP can modify these entries via UPnP.

Setup > UPnP

UPnP

UPnP Function

Select Yes to enable the UPnP function.

Otherwise, keep the default, No.

Service

Select the Service you want.

If the Service you need is not listed in the menu, click

Service Management to add the new service. The Service

Management screen appears.

Service Management

Service Name

Enter a name.

Protocol

Select the protocol it uses.

External Port

Enter the external port number.

Internal Port

Enter the internal port number.

Click Add to List. Click Save Settings to save your changes,

or click Cancel Changes to undo them. Click Exit to return

to the UPnP screen.
If you want to modify a service you have created, select it

and click Update this service. Make changes. Click Save

Settings to save your changes, or click Cancel Changes

to undo them. Click Exit to return to the UPnP screen.
If you want to delete a service you have created, select it

and click Delete selected service. Click Save Settings

to save your changes, or click Cancel Changes to undo

them. Click Exit to return to the UPnP screen.

Name or IP Address

Enter the name or IP address of the

server that you want the Internet users to access.

Enable

Select Enable to enable this UPnP entry.

Click Add to List, and configure as many entries as you

would like, up to a maximum of 30. To delete an entry,

select it and click Delete selected application.
Click Show Tables to see the details of your entries. The

UPnP Forwarding Table List appears.

Advertising