Cisco 4-Port SSL/IPSec VPN Router RVL200 - Manual (Page 70)


Virtual Passage SSL VPN Client
4-Port SSL/IPSec VPN Router
Appendix B
Before You Begin (Linux OS)
Make sure you have administrative rights on your
computer. Then install the freeware, Java Runtime
Environment (JRE), on your computer. To download the
freeware, visit Java-related websites. If you do not install
JRE, a warning message will appear, and you cannot install
the Virtual Passage Client.
Warning Message
Login for the SSL VPN Portal (Linux OS)
Follow these instructions to log in:
Enter the IP address of the Router, https://<WAN IP
address of the Router>, in your web browser. Then
press the Enter key.
A login screen appears. Enter your user name in the
User Name field, and enter your password in the
Password field.
Click Login.
SSL VPN Portal Login Screen
If your user type is Administrator, then you can access the
web-based utility. If your user type is User, then you can
use Virtual Passage only.
Installation of the Virtual Passage Client
(Linux OS)
The first time you create an SSL VPN tunnel, you have to
install the Virtual Passage Client on your computer.
1.
2.
3.
Before you begin, make sure you have administrative
rights on your computer. Then follow these instructions:
Click the Unlock icon.
Click the Unlock Icon
A screen may appear indicating that the digital
signature cannot be verified. Linksys has confirmed
that the digital signature is valid.
Click Run.
Click Run
A screen may appear indicating that the certificate
cannot be verified. Linksys has confirmed that the
certificate is valid.
Click Yes.
Click Yes
1.
2.
3.