Cisco 4-Port SSL/IPSec VPN Router RVL200 - Manual (Page 73)


Bandwidth Management
4-Port SSL/IPSec VPN Router
Appendix C
Creation of New Bandwidth Management
Rules
Create four new rules: Vonage VoIP (Upstream), Vonage
VoIP (Downstream), Vonage 2 (Upstream), and Vonage 2
(Downstream).
On the Bandwidth Management screen, select Vonage
VoIP from the Service drop-down menu.
Enter the IP address or range you need to control. To
include all internal IP addresses, keep the default, 0.
From the Direction drop-down menu, select Upstream
for outbound traffic.
In the Min. Rate field, enter the minimum rate for the
guaranteed bandwidth. For example, you can set a
minimum rate of 40 kbit/sec.
In the Max. Rate field, enter the maximum rate for
the maximum bandwidth. For example, you can set a
maximum rate of 80 kbit/sec.
Select Enable to enable this rule.
After you have set up the rule, click Add to list.
Create Vonage VoIP Rule
Set up a second rule for Vonage VoIP, this time for the
Downstream direction.
Select Vonage VoIP from the Service drop-down
menu.
Enter the IP address or range you need to control. To
include all internal IP addresses, keep the default, 0.
From the Direction drop-down menu, select
Downstream for inbound traffic.
In the Min. Rate field, enter the minimum rate for the
guaranteed bandwidth. For example, you can set a
minimum rate of 40 kbit/sec.
In the Max. Rate field, enter the maximum rate for
the maximum bandwidth. For example, you can set a
maximum rate of 80 kbit/sec.
Select Enable to enable this rule.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
After you have set up the rule, click Add to list.
Set up a rule for Vonage 2. Select Vonage  from the
Service drop-down menu.
Enter the IP address or range you need to control. To
include all internal IP addresses, keep the default, 0.
From the Direction drop-down menu, select Upstream
for outbound traffic.
In the Min. Rate field, enter the minimum rate for the
guaranteed bandwidth. For example, you can set a
minimum rate of 40 kbit/sec.
In the Max. Rate field, enter the maximum rate for
the maximum bandwidth. For example, you can set a
maximum rate of 80 kbit/sec.
Select Enable to enable this rule.
After you have set up the rule, click Add to list.
Set up a second rule for Vonage 2 (Downstream). Select
Vonage  from the Service drop-down menu.
Enter the IP address or range you need to control. To
include all internal IP addresses, keep the default, 0.
From the Direction drop-down menu, select
Downstream for inbound traffic.
In the Min. Rate field, enter the minimum rate for the
guaranteed bandwidth. For example, you can set a
minimum rate of 40 kbit/sec.
In the Max. Rate field, enter the maximum rate for
the maximum bandwidth. For example, you can set a
maximum rate of 80 kbit/sec.
Select Enable to enable this rule.
After you have set up the rule, click Add to list.
Create Vonage 2 Rule
Click Save Settings.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.