Canon VB-C60B - Manual (Page 147)

5-7
Appendix
Log Message List
Message <pan | tilt> stopped - c=<error code> (A460)
Explanation The pan/tile control function was disabled because a failure occurred while controlling the pan/tilt.
Countermeasure If this is not resolved after a reboot, it is a camera failure.
Remark Recover it at http://vbip/-wvhttp-01-/platformreset (if it is not a camera failure).
●A460 Pan/tilt sub system stop
Message camera initialization failure - <error code> (A450)
Explanation The camera control function was stopped because the camera control system could not be initialized.
Countermeasure If this is not resolved after a reboot, it is a camera failure.
●A450 Camera initialization failed
●A350 Camera control system
Message camera status timeout - resetting (A350)
Explanation The camera control system was reset because a communication timeout with the camera occurred.
Countermeasure If the problem persists, it is a camera failure.
●A330 Video input system failure
Message video input timeout - resetting
Explanation After video input was stopped, the video input system was reset.
Countermeasure If the problem persists, it is a camera failure.
●A260 Pan/tilt position slipped
Message <pan/tilt> slipped - c=<error code>
Explanation A pan/tilt position was misaligned.
Message camera control timeout - <camera command>
Explanation A failure occurred during the initialization due to a command timeout (upright/inverted installation,
universal head initialization, dome).
Countermeasure If this is not resolved after a reboot, it is a camera failure.
●A250 Control failed during camera initialization
Message corrupt panorama image - ignored
Explanation The panorama image file is invalid.
Countermeasure Recapture a panorama image and register it again.
Remark This may occur when registering a file while it is opened.
●A201 Registered panorama image failure