Canon VB-C60B User Manual

Page 63

Advertising
background image

2-5

VBAdmin Tools

When the camera is disconnected after start up, select
“Connect” from the File menu bar to display the
Connection Setting dialog.

Start Up VBAdmin Tools

4.

VBAdmin Tools starts

You can start the Panorama Creation Tool, View
Restriction Tool, Preset Setting Tool, Motion Detection
Tool, Log Viewer or Admin Viewer by clicking the
button for each tool.

Tip

● Panorama Creation Tool, View Restriction Tool, Preset Setting Tool and Motion

Detection Tool cannot be launched simultaneously. Log Viewer and Admin Viewer

can be launched simultaneously.

● When connecting to another Canon network camera other than VB-C60, you may

not be able to use some of the tools.

7 FTP

To use the Panorama Creation Tool and the Log Viewer of the VBAdmin Tools, it is
necessary to connect to VB-C60 using FTP. The FTP connection mode can be selected
from the PASV mode or PORT mode.
Use PASV mode

Check it when selecting the PASV mode. Normally, select PASV mode. Clear the check
box when using PORT mode.

Note

Note on Windows Vista/XP

If you start up VB Initial Setup Tool on Windows Vista/XP, Windows Security Alert

dialog may appear. If the dialog appears, click “Unblock”. Once you click “Unblock”,

the dialog box will not appear again.

3. A confirmation message is displayed

Click “OK”.

Note

If connecting to the camera with specifying IPv6 address, you cannot use Admin

Viewers with Internet Explorer.

Advertising