Regulatory notices, Fcc statement, Safety information – Cisco TOPSPIN SFS 3001 User Manual

Page 5: Electrical cautions

Advertising
background image

v

Regulatory Notices

FCC Statement

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.

Safety Information

“Electrical Cautions” on page v

“General Cautions” on page vii

“Laser Cautions” on page vii

Electrical Cautions

Use only the power cable provided with your Topspin system. Inspect the power cord and determine if it
provides the proper plug and is appropriately certified for use with your electrical system. Discard the
cord if it is inappropriate for your country’s electrical system and obtain the proper cord, as required by
your national electrical codes or ordinances.

CAUTION: Grounding is supplied by the ground-prong on the 3-prong power cable. Do not attach a
separate ground cable. Do not use adapter plugs. Do not remove the ground prong from the cable.

Advertising