Motorola MBP10 - Manual

MOTOROLA MOTOROLA
USER’S GUIDE MBP10
DIGITAL BABY MONITOR
Welcome...
to your new Motorola Digital Baby Monitor!
Thank you for purchasing the MBP10. This baby monitor uses digitai
communication which ensures that you can hear your baby clearly
without any distracting noise or interference.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola product, you will need to provide a
copy of your dated sales receipt to confirm warranty status.
Registration is not required for warranty coverage.
For product related questions, please call: 0845 218 0890 in the UK
(65) 68412668 in Singapore
On the Web: www.motoroia.com
Overview of your Parent unit Overview of your Baby unit
This User’s Guide provides you with all the information you need to
get the most from your product.
Before you can use the baby monitor, you’ll need to insert and fully
charge the batteries on the Parent unit. Please read the Safety
Instructions in section 1 “Safety Instructions” before you install the
units.
Got everything?
1 X Parent unit
1 X Baby unit
2 X AAA Rechargeable batteries for the Parent unit
1 X Power adapter for the Parent unit
1 X Power adapter for the Baby unit
The features described in this user’s guide are subject to
modifications without prior notice.
1 .
2 .
3.
4.
5.
6 .
7.
Link indicator LED
Volume down
button
Power On/Off
button @
Speaker
Volume up
button "¿0
Power (ON / ga'
LED
Volume indicator
LEDs
Power adapter
connector
12. Power LED
13. Power On/Off
button
14. Microphone
15. Paging button
16. Power adapter
connector
Table of contents
3.
Safety Instructions.................................................................. 6
Getting started........................................................................ 7
2.1 Baby unit power supply.................................................................. 7
2.2 Parent unit battery installation........................................................7
2.3 Parent unit power supply................................................................9
2.4 Link..................................................................................................9
2.5 Registration...................................................................................10
2.6 Paging...........................................................................................10
Using the WIBP10................................................................ 10
3.1 Volume adjustment on the Parent unit..........................................10
Disposal of the device (environment).................................... 11
Cleaning................................................................................11
Help.......................................................................................12
General Information..............................................................12
i. Safety Instructions
WARNING
This baby monitor is compliant with all relevant standards regarding
electromagnetic fields and is, when handled as described in the User’s
Guide, safe to use. Therefore, always read the instructions in this User’s
Guide carefully before using the device.
•
Adult assembly is required. Keep small parts away from children
when assembling.
• This product is not a toy. Do not allow children to play with it.
• This baby monitor is not a substitute for responsible adult
supervision.
• Keep this User’s Guide for future reference.
• Do not place the baby unit or cables in the cot or within arm's reach of
the baby (the unit should be at least 1 metre away).
• Keep the cords out of reach of children.
• Do not cover the baby monitor with a towel or blanket.
• Never use extension cords with power adapters. Only use the power
adapters provided.
• Test the baby monitor before use. Become familiar with its functions.
• Do not use the baby monitor near water.
• Do not install the baby monitor near a heat source.
• Only use the chargers and power adapters provided. Do not use
other chargers or power adapters as this may damage the device and
batteries.
• Only insert batteries of the same type. Never use ordinary, non-
rechargeable batteries in the parent unit. Insert batteries with the
right polarity (indicated in the battery compartment).
• Do not touch the charger or plug contacts with sharp or metal objects.
CAUTION
Risk of explosion if battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions.
2. Getting started
2.1 Baby unit power supply
1.
Connect the small plug of the power adapter to the power connector
on the baby unit and the other end of the adapter to the mains
socket (230V/50HZ).
NOTE
Only use the enclosed power adapter (6V DC/300mA).
2.
Press The Power LED will illuminate.
3. Press and hold to switch off the baby unit.
2.2 Parent unit battery instaiiation
The Parent unit can be used with either rechargeable batteries (2 AAA
size, Ni-MH type supplied) or from the mains power via the power
adapter supplied.
WARNING
Never use ordinary, non-rechargeable batteries. The power mains
adapter provides a charging function, and non-rechargeable batteries
may burst and cause damage!
NOTE
The Ni-MH rechargeable batteries must be charged for 15 hours before
using the Parent unit without the mains power.
We recommend the rechargeable batteries are installed, so that the unit
continues to work in the event of a mains power failure.
1. Using a screwdriver, turn the screw of the battery cover on the back
of the parent unit 90 degrees in a counterclockwise direction.
Remove the battery cover.
NOTE
Rotate the belt clip to its hanging position to make it easier to access the
battery compartment.
Do not try to turn the screw further than the
OPEN position marked on the cover.
2.
Install 2 AAA size Ni-MH rechargeable batteries with the polarity as
shown in the diagram above, and by the "+” and markings in the
battery compartment.
3. Close the battery compartment and turn the screw 90 degrees back
in a clockwise direction.
4. Press @. The Power (ON / LED will illuminate green if it
only has battery power.
5. Press and hold @ to switch off the parent unit.
NOTE
When the battery level is low, the green power LED will flash and the
parent unit will emit a warning beep once every minute. If the baby unit
loses power or goes out of range, the link will be lost and the parent unit
will emit a warning beep every 3 seconds and the green link LED on the
parent unit will continue to flash.
WARNING
Do not mix old batteries with new ones.
Keep batteries away from small children.
Do not short-circuit batteries or dispose of in fire.
Remove the batteries if this device is not going to be used for a long
period of time.