Canon Vb-C50fi - Manual (Page 183)

6-19
Using the Picture Recor
ding Function
Automatic Downloading by Notification
You will not be able to record images if there is insufficient space on the server. The VB-C50Fi
can receive a low server capacity notification sent from the server when available space on the
server falls below the value set, and automatically downloads images to a specified PC, thereby
increasing the available space on the server.
1. Choose “Download automatically by notification” in the “Tools” menu bar.
2. Perform the settings relating to notification.
q Server List
Displays a list of the servers from which the images
can be downloaded. The settings relating to
notification of each server registered with this tool
(
→ P.6-10) are shown in this list.
“Server Name”
Displays the names of the servers registered with
this tool.
“Notification”
Displays the setting for whether the server will send a low server warning message when
available space on the server reaches the value set (
→ P.6-20).
“Free space (MB)”
Displays the setting value for available space on the server. When available space has
fallen below this setting, the server sends a low server capacity warning message.
“Host”
Displays the name of the host which will send the low server capacity warning message.
“Port”
Displays the TCP port of the host.
w Server status display area
Displays the status of the selected server. Depending on the server conditions, you may or
may not be able to specify settings in the “Server Setting” button and the “Notification
Settings” button.
“The Notification Function is available for the server”
Both the “Server Setting” and “Notification Settings” buttons are available.
“The server does not support the Notification Function” and “Failed to connect to
the server”
The “Server Setting” button is available but the “Notification Settings” button is not.
“The server information is invalid”
The “Server Setting” button is available but the “Notification Settings” button is not.
“None”
Neither the “Server Setting” button nor the “Notification Settings” button is available.
e Reception Port No.
Specifies the TCP port number which will receive the low server capacity warning message
from the server. The default is 1906.
Using VBCollector
q
w
r
y e t