On-screen displays and data code – Canon FS10 User Manual

Page 49

Advertising
background image

49

* Only these digital effects are available in

mode.

Setting

FUNC.

(

26)

[

D.EFFECT OFF]

Desired fader/effect*

**

* You can preview the digital effect on the

screen.

** The icon of the selected digital effect

appears.

Applying

1

Press

to display the joystick

guide.

If

does not appear on the joystick

guide, repeatedly push the joystick
(

) toward [NEXT] to display it.

2

Push the joystick (

) toward

.

• The icon of the selected effect

turns green.

• Push the joystick (

) again to

deactivate the digital effect (its
icon will turn white again).

Activate the selected fader in record
pause mode (

), then press

to start recording with a fade in.

Activate the selected fader while
recording (

), then press

to

fade out and pause the recording.

mode: Activate the selected

effect while recording or in record
pause mode.

mode: Activate the selected effect

and then press

to record the

still image.

NOTES

• When you apply a fader, not only the

picture but also the sound will fade in or
out. When you apply an effect, the
sound will be recorded normally.

• The camcorder retains the last setting

used even if you turn off the digital
effects or change the recording
program.

On-Screen Displays and Data Code

With every scene or still image
recorded, the camcorder keeps a data
code that includes the date, time and
information about the camera setup at
the time of recording. While viewing a

[

ART], [

MOSAIC]

Select one of these digital effects to add “flavor”
to your recordings.

FUNC.

FUNC.

T

O

F

ADE

I

N

T

O

F

ADE

O

UT

T

O

ACTIVATE

AN

EFFECT

Start/Stop

Start/Stop

PHOTO

Advertising
This manual is related to the following products: