Canon FS10 User Manual

Page 92

Advertising
background image

Additional Information

92

PRINT ERROR

- Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the printer back on and

reconnect the USB cable. Check the printer status.

- When you are printing using the

button, check the print settings.

PRINT ORDER ERROR

- You attempted to set more than 998 still images in the print order.

PRINTER COVER OPEN

- Close the printer cover securely.

PRINTER ERROR

- A malfunction has occurred that may require repairs. (Canon PIXMA printers: the printer's green power lamp

and orange error lamp flash alternately.)

- Disconnect the USB cable and turn off the printer. Unplug the printer's power cord from the power outlet and

contact the appropriate customer support center or service center.

PRINTER IN USE

- The printer is in use. Check the printer status.

SET PRINT

ORDER

- No still image has been marked with a print order.

NOTES

About Canon PIXMA/SELPHY DS Printers: If the printer’s error indicator flashes or an error
message appears on the printer’s operation panel, refer to the printer’s instruction manual.
• If you cannot solve the problem even after consulting this list and the printer's instruction

manual, contact the closest Canon Service Center (refer to the list included with the
printer).

Advertising
This manual is related to the following products: