AVF T324 T3 - Manual

Wood Screw 1"
(100)
Philips (+)
Screwdriver
Cordless Drill
and Philips (+)
bit.
7/16 Wrench
or Socket set
Bridge
(1)Short 12"
(1) Standard 36"
Tabletop T
(1)
Table
Leg
(2)
Rack
base
(1)
Rack side
(1)Right Side
(1) Left Side
Rack
door
(1)
Long Bolt
(20)
Cable management
(2)
Rack
Leg
(4)
Grommet
(4)
L-Bracket
(5)
10RU
Rackrail
(2)
Tabletop Surface
(1)
CAM Screw
(30)
3/4" CAM
(30)
Mending plate
(10)
Wood Screw 5/8"
(30)
Table 324
VIDEO FURNITURE INTERNATIONAL
190 Don Hillock Drive, Aurora, Ontario L4G 0G9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local:905-751-1459
Note: If you cannot understand these instructions or are concerned about the safety of the installation
Contact a qualified contractor or contact VFI at 1-877-834-3876. For indoor use only
Confirm all parts are included before you begin assembly. Extra hardware is provided and will be left over.
2 people are recommended to assemble this table. Assembly time approx 1 hour.
Thank you for purchasing VFI's 324 Table.
These instructions will guide you through it's assembly.
Additional add-on furniture will have its own instructions.
Supplied Parts:
Supplied Hardware:
Tools required:
(Not Included)
Page 1
of 5
Assembly Instructions
Ver 1.5
Short Bolt
(30)