Canon A80 User Manual
Page 155
151
Connect
ing
USB port
USB cable
terminal
1. Open the terminal cover
with your fingernail.
2. Insert the connector
until it clicks.
1. Terminal
cover
1
Install the driver and the software
applications bundled on the Canon Digital
Camera Solution Disk.
Please see the
Software Starter Guide
for information on
system requirements and installation instructions.
2
Connect the supplied USB interface cable
to the computer’s USB port and the
camera’s
terminal.
• You do not need to turn off the computer or camera when
making a USB connection.
• Please refer to your computer manual for information
regarding the location of the USB port.
3
Slide the mode switch to
.
Press the ON/OFF button until the power
indicator lights.
• A image appears on the LCD monitor.
• When the connection between the camera and a
computer completes, the LCD monitor turns off and the
power indicator lights green.
2. USB cable