PDR Mounts iwbB250 - Manual

M odel
Thank you for purchasing this PDR product
To ensure the correct usage, please read and follow the instruction manual thoroughly. Please store the instructions in a safe place for future reference.
IWB-250 IN WALL BOX INSTRUCTIONS
All PDR mounts and adapters carry a lifetime warranty against defects in material and workmanship.
We are not liable for improper installation that results in damage to mounts, adapters or presentation equipment.
Mounts by
A division of David Engineering & Mfg. Inc.
To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to withstand the weight of both the display
and the IN WALL BOX (IWB-250)
Shown with AWM-250 (not included)
Can also be used with the AWM-175 (not included)
IWB-250
In wall box
Special techniques are necessary for installation of the panel display mount.
Do not attempt to perform this work by yourself.
Request an installation specialist to install this unit.
Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.
This product (IWB-250) is intended for use in standard 2”x 4” (wood) construction with studs on 16” centers.
All electrical connections should be performed by a qualified electrician.
Extreme caution should be used cutting into walls. Electrical wiring and plumbing may exist and could cause DAMAGE OR SHOCK
1