Carbine 6850 - Manual (Page 4)

B A T T E R I E S
ALA-RF3
• For models: AL375, AL475, AL575, AL675, AL775,
CD574, CD575 and CD675
CD-RF6
• For models: CDTL4, CD574A, CD575A, CD675,
PL30S, PL40S, PL50S and PL60S
CA-RFK3
• 3-button code hopping key transmitter
CA-RC7
• 1-way, 4-button code hopping transmitter
• For models: PLUS-6850 and PLUS-5850
CA-RFLCD2
• 2-way LCD remote transmitter
• For models: PLUS-6850 and PLUS-5850
Replacement Transmitter Battery
ALA-BATT/P
• Fits most RF transmitters
• 12 Volt
• 5 batteries per card
PK. 25 WT. 1
Replacement Transmitter Battery
CR2032
• For CA-RC4PET transmitter (2 required)
• 3 Volt
• 5 batteries per card
PK. 5 WT. 1
Replacement Transmitter Battery
CR2450
• 3 Volt
• 5 batteries per card
PK. 5 WT. 1
ALA-RF3
CA-RC7
CD-RF6
CA-RFK3
CA-RC4PET
CA-RC5HFS
ALA-BATT/P
CR2032
4
PL-RC12
• 4-button code hopping transmitter without
Carbine logo
• For Models: PL60C and PL61
CA-RC4PET
• 4-button passive disarming transmitter with
Carbine logo
• For models: PLUS-4500, PLUS-4600, PLUS-4700,
PLUS-5500 and PLUS-5600
CA-RC5HFS
• Replacement SAW remote transmitter
• For models: START1-PLUS, START2-PLUS, PLUS-
6000, PL70 and PL80
Note: Yellow (*) on start button
CA-RC6HF
• Replacement SAW remote transmitter
• For models: PLUS-4500, PLUS-4700, PLUS-5500,
PLUS-5600, PLUS-5800 and PLUS-6800
CA-RFLCD1
• 2-way LCD remote transmitter
• For models: PLUS-5800 and PLUS-6800
Remote Transmitters and Batteries Security Systems
9
T R A N S M I T T E R S
CA-RC6HF
CA-RFLCD1
PL-RC12
CR2450
Standard Features:
• Built-in 40 amp starter disable relay
• Positive/negative door pin input
triggers
• Auxiliary ground input trigger for
hood/trunk pin
• Plug-in alarm status LED indicator
• Plug-in valet/override switch
• 60 second rearm timer
• Horn or optional siren output
• Plug-in dual-stage electronic shock
sensor port with prewarning chirp
(shock sensor not included)
• Remote personal panic system activat-
ed by factory remote keyless entry
transmitters
• Pathway illumination and parking lights
stay "On" for 30 seconds after disarm
• Door lock switch disarm protection
Programmable Features:
• Pathway illumination
• Automatic/passive arming
• Chirp status indicator on/off
• Panic on/off
• Ignition control door lock/unlock:
locks/unlocks doors when ignition key
is turned on/off (optional feature, hard-
wire only; some vehicles may require
relays)
PK. 12 WT. 11
PL21
Security System Upgrade for All Factory Installed
Remote Keyless Entry Systems
Standard Features:
• Two, 4-button code hopping
transmitters with separate lock and
unlock buttons
• Built-in relays for starter disable, parking
lights flash and dome light supervision
• Horn and siren output
• 60 second rearming timer with auto-
matic door relocking
• Trigger inputs for all doors and
hood/trunk
• Dip switch programmable current
sensor trigger
• Dip switch programmable automatic
locking of power door locks when the
security system automatically arms
• Dip switch programmable ignition key
controlled door lock/unlock
• Plug-in alarm status LED indicator
• Plug-in valet/override switch
• (+/-) power door lock outputs
• Channel 2 and 3 ground output for
optional accessories
• 3 mode trigger memory
• Eeprom code memory
Remote Controlled Features:
• Arming/disarming of security system
with or without chirp confirmation
• Panic
• Channel 2
• Channel 3
Remote Programmable Features:
• Chirp status indicator on/off
• Safety illumination sentinel system
• Automatic arming
Optional Accessories:
• Five wire ground at rest door locking
system (ALA-DL1 or ALA-DL2 with
T-harness)
• One wire multiplexing door locking
system (ALA-DL1 or ALA-DL2 with
T-harness)
• Driver's door unlock first output
(hardwire)
• Additional feature disable (ALA-RPS)
• Remote trunk or rear hatch release
(ALA-RPT)
• Plug-in dual-zone sensor (ALA-95,
ALA90)
PK. 12 WT. 11
PL61
3-Channel Security System with Code Hopping
Transmitters
P R I V A T E L A B E L
CA-RFLCD2