Ryobi YN301PL1 User Manual

Ryobi Conditioners

Advertising
background image

WARNING:

To reduce the risk of injury, user must read and understand the

operator’s manual for the air compressor before using this accessory.
Always wear eye protection. Do not point nozzles at people or
pets. Turn off the air compressor before changing or adjusting
accessories.

WARNING:

Current attachments and accessories available for use with this

tool are listed below. Do not use any attachments or accessories
not recommended by the manufacturer of this tool. The use of
attachments or accessories not recommended can result in serious
personal injury.

A -

25 ft. CoIled Hose

(AttACHed to CompRessoR)

The coiled air hose can be used to connect air tools to the
compressor. It stores neatly in the hose retainer.

b - AIR bloW Nozzle

The air blow nozzle delivers controlled streams of air and can be
used to clear debris and dust from the compressor.

C - AIR CompRessoR

The air compressor can be used to operate air powered tools and
air accessories.

d - INflAtIoN Nozzle

The inflation nozzle can be attached to the air blow nozzle and
used as an inflator.

e - mAle AIR pluGs (2)

The male air plugs can be joined to female air plugs to form leak
proof seals.

ACCessoRIes foR

YN301pl / YN301pl1 AIR CompRessoR

L

E

E

K

J

B

G

D

I

H

f - bARbed pluG

(AttACHed to CoIled Hose)

the barbed plug can be used to attach pneumatic tools or
accessories to the air hose.

G - osHA sAfetY Nozzle

(AttACHed to AIR bloW Nozzle)

The OSHA safety nozzle prevents excessive pressure build up
by allowing air to escape.

H - peNCIl tIRe GAuGe

The pencil tire gauge can be used to measure the amount of air
pressure in tires. The air pressure in the tires should be checked in
cool condition (before driving). Confirm that tire valve stem is free of
dirt and debris before checking air pressure. Press pencil tire gauge
firmly onto valve stem and read PSI on indicator. Add or remove air
pressure to the tire to meet the pressure recommendations of the
auto or tire manufacturer. Pencil tire gauge air pressure tolerance
is +/- 2 psi.

I - RubbeR Nozzle

The rubber nozzle can be attached to the air blow nozzle and
used as an inflator.

j - tHReAd seAl tApe

Thread seal tape can be wrapped at thread connections to help
prevent leaks.

k - tIRe CHuCk

The tire chuck can be used to inflate automotive tires.

WARNING:

To reduce the risk of injury, do not over-inflate tires. During inflation

regularly check the pressure using the tire pressure gauge.

l - uNIveRsAl quICk CoNNeCt CoupleR

The universal quick connect coupler can be used to attach

pneumatic tools or accessories to the compressor.

AveRtIssemeNt :

Pour réduire les risques de blessure, l’utilisateur doit lire et comprendre

le manuel d’utilisation de son compresseur d’air avant d’utiliser cet

accessoire. Toujours porter une protection oculaire. Ne pas diriger la

buse vers des personnes ou des animaux. Éteindre le compresseur

d’air avant de changer ou d’ajuster un accessoire.

AveRtIssemeNt :

Les pièces et les accessoires compatibles avec cet outil sont

énumérés ci-dessous. Ne pas utiliser des pièces ou d’accessoires

non recommandés par le fabricant de ce produit. L’utilisation de

pièces et accessoires non recommandés peut entraîner des blessures

graves.

ACCessoIRes pouR le CompResseuR d’AIR YN301pl / YN301pl1

Français

A - tuYAu spIRAle de 7,62 m (25 pi)

(fIxé suR le CompResseuR)

Le tuyau spirale à air peut être utilisé pour raccorder les outils

pneumatiques au compresseur. Il se range parfaitement dans la

retenue.

b - buse à jet d’AIR

La buse à jet d’air produit un jet d’air contrôlé et peut être utilisée

pour enlever les débris et la poussière du compresseur.

C - CompResseuR d’AIR

Le compresseur d’air peut être utilisé pour faire fonctionner des

outils ou des accessoires pneumatiques.

d - buse de GoNflAGe

La buse de gonflage se fixe sur la buse à jet d’air et peut être utilisée

comme gonfleur.

Advertising
This manual is related to the following products: