Avaya 3600 Series - Manual (Page 8)

Avaya, Inc. Avaya Configuration Cradle
Administrator Guide
3. Installing the Avaya Configuration Cradle
Set up the Configuration Cradle by first obtaining the appropriate OEM power
supply for your country or region. Place the Configuration Cradle on a flat,
horizontal surface and plug the power supply into the Configuration Cradle and into
an appropriate wall outlet. Plug a straight serial cable into the Configuration Cradle
and into an available serial port on the PC.

The serial cable must be plugged directly into the serial port on the PC.
Please do not use port replicators or adaptors, as these do not properly
handle the necessary communication requirements between the
Configuration Cradle and the PC.
Set up a folder for WT configuration on the PC and download the programming
software from
http://www.spectralink.com/service/software.php into this folder. Run
the PhoneConfig.exe file.
Note that there is no installer or uninstaller since the program does not modify your
system or registry. It runs from its current location and stores its settings locally.
Serial port settings are handled automatically by the Configuration Cradle software.
If necessary, the COM port the Cradle is using can be set in the
Settings menu.
21-300630, Issue 1, July 2005 Page 8