Cisco 1721 - Manual (Page 10)

Preface
Related Documentation
xii
Cisco 1721 Router Hardware Installation Guide
78-13834-02
• Appendix A, “Technical Specifications,” lists the physical characteristics,
environmental requirements, and power specifications for the router.
• Appendix B, “Cabling Specifications,” describes the cables and cabling
guidelines for the router.
• Appendix C, “Installing and Upgrading Memory and Virtual Private Network
Modules,”
describes how to install or upgrade memory modules in your
router.
• Appendix D, “Ordering and Configuring an ISDN Line,” describes how to
order and configure ISDN line so that it will operate with a Cisco 1700 Series
router.
Related Documentation
The following publications provide related information on this product:
• The Quick Start Guide for Installing Your Cisco 1721 Router, which came
with your router, has instructions for quickly cabling and powering up the
router.
• Cisco 1700 Router Software Configuration Guide describes some common
network scenarios and how to use the Cisco IOS command-line interface
(CLI) to configure the router in these scenarios.
• Cisco WAN Interface Cards Hardware Installation Guide describes how to
install and configure the WICs that are supported by the Cisco 1721 router.
• Cisco IOS command reference and configuration guides provide complete
information about all Cisco IOS CLI commands and how to use them, as well
as information on designing and configuring LANs and WANs.