Cisco 7906G - Manual

xiii
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1
OL-14585-01
Preface
Overview
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco
Unified Communications Manager 6.1 provides the information you need to
understand, install, configure, manage, and troubleshoot the
Cisco Unified IP Phones 7906G and 7911G in a Voice-over-IP (VoIP) network.
Because of the complexity of a Unified Communications network, this guide does
not provide complete and detailed information for procedures that you need to
perform in Cisco Unified Communications Manager (formerly Cisco Unified
CallManager) or other network devices. See the
“Related Documentation” section
on page xv for a list of related documentation.
Audience
Network engineers, system administrators, or telecom engineers should review
this guide to learn the steps required to properly set up the
Cisco Unified IP Phones 7906G and 7911G on the network.
The tasks described are administration-level tasks and are not intended for
end-users of the phones. Many of the tasks involve configuring network settings
and affect the phone ability to function in the network.
Because of the close interaction between the Cisco Unified IP Phone and
Cisco Unified Communications Manager, many of the tasks in this manual
require familiarity with Cisco Unified Communications Manager.