Fog lamps, License plate lamp (coupe and sedan), Fog lamps -38 license plate lamp (coupe – Cadillac 2011 CTS-V Sports Sedan User Manual

Page 360: Sedan) -38, 38 vehicle care

Advertising
background image

Black plate (38,1)

Cadillac CTS/CTS-V Owner Manual - 2011

10-38

Vehicle Care

Fog Lamps

To replace a front fog lamp bulb:

1. Pull out the push-pins located on

the underside of the protection
shield to remove the shield.

2. Reach up behind the front

bumper area from under the
vehicle to access the lamp
housing.

3. Remove the electrical connector

from the bulb by lifting the
two plastic clips.

4. Remove the bulb socket from

the lamp housing by turning the
bulb socket one-quarter turn
counterclockwise.

5. Pull the old bulb from the lamp

housing keeping the bulb
straight as you pull it out.

6. Install a new bulb.

7. Reinstall the electrical connector

by pushing in the two plastic
clips.

8. Push the bulb socket into the

lamp housing and turn the
socket one‐quarter turn
clockwise.

License Plate Lamp
(Coupe and Sedan)

To replace one of these bulbs:

1. Push the tab to remove the

license plate lamp.

2. Turn the license plate lamp

assembly down to remove it.

3. Turn the socket

counterclockwise and remove it.

4. Pull the bulb straight out to

remove it.

5. Push the new bulb straight into

the socket.

6. Reverse Steps 1 through 3 to

reinstall the license plate lamp
assembly.

Advertising
This manual is related to the following products: