Checking automatic redialing -32, Checking automatic redialing, Press [monitor] ➞ [f1] (tx/rx result) – Canon IMAGERUNNER 2010F User Manual
Page 115
Redialing When the Line Is Busy
3-32
Basic Sending
3
❑
Press [F3] (
▼) or [F4] (▲) to highlight <01 ON> or <02 OFF>
➞
press [OK].
If you do not want to use the TX Error Resend function, select <02 OFF>
➞
press
(OK)
➞
proceed to step 6.
If you selected <01 ON>, the RESEND TX FROM menu appears.
❑
Press [F3] (
▼) or [F4] (▲) to highlight <01 ALL PAGES>, <02 ERROR & 1ST
PAGE>, or <03 ERROR PAGE>
➞
press [OK].
ALL PAGES: Resends all pages of the document.
ERROR & 1ST PAGE: Resends the document from the page where the error
occurred. It also resends the first page of the document.
ERROR PAGE: Resends the document from the page where the error
occurred.
The display returns to the TX SETTINGS menu.
6
Press [Reset] to return to the Fax Basic Features screen.
Checking Automatic Redialing
1
Press [Monitor]
➞ [F1] (TX/RX RESULT).
The following screen is displayed.
NOTE
•
If you do not want to send the document using automatic redialing, press
(
▼) or
(
▲) to select the transmission you want to cancel
➞
press
(DELETE DOCMT).
•
If the message <OK TO DELETE?> appears on the display, press
(YES)
to cancel automatic redialing. The document will be deleted from memory.
F3
F4
OK
F3
F4
OK
Reset
Monitor
F1
F2
F3
F4
F3