Canon IMAGERUNNER 2010F - Manual (Page 150)

Setting Up and Using PIN Codes 4-27
Additional Sending F
eatures
4
Setting PIN Code Access for Speed Dialing
This method enables you to register one-touch and coded speed dialing keys for
PIN code access. When a user attempts to dial with a speed dialing key, the
machine prompts the user to enter a PIN code.
When <NECESS. PIN CODE> of the PIN Code setting is ‘01 OFF’, you can perform
the procedure described below. (See “Setting a PIN Code,” on p. 4-22.)
1
Select the speed dialing location to register the telephone
number.
For details on registering the telephone number for speed dialing, see “Setting
Up Speed Dialing,” on p. 2-3.
2
If the PIN code is to be dialed before the telephone number,
open all three one-touch speed dialing panels
➞ press [Pin
Code]
➞ enter the telephone number using the numeric keys.
If the PIN code is to be dialed after the telephone number, enter the telephone
number before pressing
(Pin Code).
3
Press [OK].
4
Repeat the procedure to continue registering additional
telephone numbers.
5
When you are finished registering, press [Reset] to return to
the Fax Basic Features screen.
1 2 3
4 5 6
7 8 9
0
@.
GHI
PRS
ABC
JKL
TUV
DEF
MNO
WXY
OPER SYMBOLS
Pin Code
OK
Reset