Canon IMAGERUNNER 2010F - Manual (Page 260)

Polling Receiving 9-9
Using P
olling
9
Polling Receiving with a Subaddress/Password
If the other party’s document is registered for polling with a subaddress and
password, you need to specify them to perform polling receiving. It is possible that
the password is not set, however. You need to be sure of the subaddress/password
setting of the other party’s fax.
1
Specify the destination of the party you are polling
➞ press
[Advanced Communication].
The ADVANCED COMM. menu appears.
NOTE
You must press (Advanced Communication) within five seconds of entering
the fax number. If you wait longer than five seconds, the machine starts to poll and
receive the documents. The timeout interval can be turned ‘OFF’. (See “Time Out
Mode,” on p. 4-7.)
2
Press [F3] (
▼) or [F4] (▲) to highlight <04 SUBADDRESS> ➞
press [OK].
Each time you press (
▼) or
(
▲), the next or previous menu option
becomes highlighted.
The menu for entering the subaddress appears.
Advanced
Communication
F3
F4
OK
F3 F4