Setting the tx/rx start speed, Setting the tx/rx start speed -7 – Canon IMAGERUNNER 2010F User Manual
Page 290
Setting the TX/RX Start Speed
10-7
Special F
ax F
eatures
10
Setting the TX/RX Start Speed
If you find the telephone line in poor condition, and it takes a long time for the
machine to start a transaction, follow the procedure below to change the
transmission speed for all documents you send and receive.
NOTE
The default setting is ‘06 33600bps’ for either <TX START SPEED> and <RX START
SPEED>.
1
Press [Additional Functions].
The ADDITIONAL FUNCTIONS menu appears.
2
Press [F3] (
▼) or [F4] (▲) to highlight <03 FAX SETTINGS>
➞
press [OK].
Each time you press
(
▼) or
(
▲), the next or previous menu option
becomes highlighted.
The FAX SETTINGS menu appears.
3
Press [F3] (
▼) or [F4] (▲) to highlight <01 USER SETTINGS>
➞
press [OK].
Additional Functions
F3
F4
OK
F3
F4
F3
F4
OK