Enter the unit’s name using the numeric keys, Press [ok, Bef ore y ou use the f ax functions – Canon IMAGERUNNER 2010F User Manual

Page 37

Advertising
background image

Registering the Required Sender Information

1-16

Bef

ore

Y

ou Use the F

ax Functions

1

The UNIT NAME menu appears.

4

Enter the unit’s name using the numeric keys

press [OK].

The unit’s name is registered, and the display returns to the USER SETTINGS
menu.

NOTE

The unit’s name can be up to 24 characters long.

If you entered a wrong letter, use the cursor keys to go back to the position you
want to correct

➞ press

(Delete)

enter the correct letter.

To delete the entire entry, press

(Clear).

5

Press [Reset] to return to the Fax Basic Features screen.

Registering the Sender Information (TX Terminal ID)

Follow the procedure below to select whether to send documents with the TX
Terminal ID.
The TX Terminal ID is printed on the top of every page the other party receives,
telling the recipient the sender’s name and fax number.

IMPORTANT

In the United States, this setting must be ‘ON’. Please see “FCC (Federal
Communications Commission),” on p. xiii and “Register
ing the Required Sender
Information,” on p. 1-12 f
or details on FCC rules governing the use of facsimile equipment
in the United States.

NOTE

If you set the TX TERMINAL ID to ‘01 ON’, you can select the position where the TX
Terminal ID appears on the recording paper, and also select a Telephone Number Mark.

The default settings are as follows:
- TX Terminal ID: ‘01 ON’
- TX Terminal ID position: ‘01 OUTSIDE IMAGE’
- Telephone Number Mark: ‘01 FAX’

OK

1

2

3

4

5

6

7

8

9

0

@.

GHI

PRS

ABC

JKL

TUV

DEF

MNO

WXY

OPER

SYMBOLS

Reset

Advertising