Canon IMAGERUNNER 2010F - Manual (Page 371)

Glossary 15-16
Appendix
15
G
Group dialing
Group dialing enables you to dial up to 199 previously registered one-touch speed
dialing or coded speed dialing numbers together as a group. This means you only
need to press a one-touch speed dial key or [Coded Dial] followed by a three-digit
code to dial a large group of numbers automatically. You register each group of
facsimile numbers under a one-touch or coded speed dialing key, so make sure a key
is available before trying to register numbers for group dialing. Once a group is
defined, you can add or delete numbers to/from the group.
I
In Use Memory lamp
A light that blinks red or maintains a steady green light when the machine is copying
or there are documents stored in memory.
ITU-T
See also CCITT/ITU-T
J
Jack
The telephone line receptacles on your wall and on the side of the main unit used to
connect your machine to the telephone line.
L
Long distance dialing
When dialing or registering long distance numbers, you sometimes have to insert a
pause either within or after the telephone number. The destination and length of the
pause differ depending on the system. Contact your local authorized Canon dealer or
your local telephone company for further information if you experience problems with
long distance dialing.
M
Manual redialing
When you use regular dialing, you can redial a number manually, simply by pressing
[Pause/Redial] on the operation panel. The last number called is the number redialed.