Canon IMAGERUNNER 2010F - Manual (Page 375)

Glossary 15-20
Appendix
15
Super Fine
This key increases the clarity of documents you send. The lamp shows you the
current setting. It is four times the standard resolution.
Super G3 FAX Expansion Kit-B1
The optional Super G3 FAX Expansion Kit-B1 enables you to connect two telephone
lines to the machine. Both lines can be used simultaneously for facsimile
transactions, either line can be given priority for transactions, or either line can be
temporarily disabled.
T
Tone/pulse setting
This setting enables you to set the machine to touch tone (T) or pulse (P) dialing,
depending on the type of phone line you have installed.
Tone
You can switch temporarily from pulse to tone dialing by pressing [Tone] before
dialing. Data services may require that you use tone dialing, so if you have a
conventional pulse dial telephone, and need to use tone dial to access the data
service, press [Tone] to tone dial on your pulse telephone line.
Transaction number
When a document is scanned into or received in memory, it is assigned a transaction
number (TX/RX). You can select documents in the memory for sending, printing, or
deleting by specifying the transaction number.
Transfer
A special feature you can set up on the machine that enables all documents received
on the main fax machine to be transferred to another fax machine. For example, you
could have the main fax machine in the office transfer all documents to your machine
at home. You can set the day and time for this feature to turn ON and OFF. Please
remember, however, that documents received in a confidential mailbox or a memory
box cannot be transferred. See also transfer password.
Transfer password
Protects the transfer settings from unauthorized access. You must enter the transfer
password, a seven-digit code, in order to view or change the transfer settings.
Transmission time
A fax transmission consists of three stages: the pre-message handshake, the
message transmission, and the post-message handshake. The transmission time
described in this manual is not the total time required for the entire transmission. It is
only the time for the message transmission. The transmission time described in this
manual is the fastest time achieved when faxes communicate in the same mode.