Canon IMAGERUNNER 2010F - Manual (Page 51)

Setting Up Speed Dialing 2-6
Speed Dialing
2
10
Press [F3] (
▼) or [F4] (▲) to highlight <03 OPTIONAL
SETTING>
➞ press [OK].
The OPTIONAL SETTING menu appears.
11
Press [F3] (
▼) or [F4] (▲) to highlight <01 OFF> or <02 ON> ➞
press [OK]
If you selected <01 OFF>, the display returns to the TEL# REGISTRATION menu.
To continue registering other numbers, repeat the procedure from step 5.
If you selected <02 ON>, the OPTIONAL SETTING menu appears. Proceed to
the next step.
NOTE
From the OPTIONAL SETTING menu, you can set transmission features, such as
the access code, TX start time, ITU-T subaddress and password, international
sending, transmission speed, and ECM transmission.
12
Press [F3] (
▼) or [F4] (▲) to set the desired optional setting ➞
press [OK].
The display for setting the item you selected appears. The optional settings
include the following items:
Item Description
ACCESS CODE
Registers an access code from two to five digits to
represent a fax number. (See “Access Code Dialing,”
on p. 2-27.)
F3
F4
OK
F3
F4
OK
F3
F4
OK