Canon IMAGERUNNER 2010F - Manual (Page 92)

Placing Originals 3-9
Basic Sending
3
If you are enlarging an STMT or LTR original to 11" x 17" or LGL paper, place the
original horizontally on the platen glass, and align it with the STMT
or LTR
marks.
3
Gently lower the feeder.
CAUTION
• Close the feeder gently, to avoid catching your hand, as this may result in
personal injury.
• Do not press down hard on the feeder when using the platen glass to make
copies of thick books. Doing so may damage the platen glass and result in
personal injury.
IMPORTANT
• If you are placing originals on the platen glass, the size of the original is detected
after the feeder has been lowered. Be sure to lower the feeder before sending.
• STMT originals and postcards cannot be detected. Follow the instructions on the
display and specify the original size or select the paper size.
NOTE
Remove the original from the platen glass when scanning is complete.