Canon XHA1S - Manual (Page 122)

122
Erasing Still images
You can erase still images one at a time or all at once.
 Be careful when erasing still images. Erased still images cannot be recovered.
 Erasing a still image that had a custom preset file embedded (recorded with the
[PHOTO + CP DATA] setting) will erase the still image and the embedded custom preset file.
Protected still images ( 123) cannot be erased.
Erasing a Single Still Image
1. Select the still image you wish to erase.
2. Press the SELECT/SET dial to open the still image operations menu.
In mode, the menu appears when you press the dial while you are reviewing a still image,
or immediately after recording a still image.
3. Select [ IMAGE ERASE].
4. Select [ERASE].
The image is erased and the previous image appears.
5. Select [ CLOSE] to close the menu.
Erasing All Images
1. Open the menu and select [CARD OPERATIONS].
2. Select [ERASE ALL IMAGES].
3. Select [YES] and close the menu.
All still images except the protected ones are erased.
MENU
( 27)
CARD OPERATIONS ERASE ALL IMAGES
CO
PY