Canon XHA1S - Manual (Page 16)

16
Preparations Preparing the Power Supply
Charging the Battery Pack
Disconnect the DC coupler from the compact power adapter before charging. Remove the terminal
cover of the battery pack.
1. Connect the power cord to the compact
power adapter.
2. Plug the power cord into a power outlet.
3. Attach the battery pack to the compact
power adapter.
• Press lightly and slide the battery pack in the
direction of the arrow until it clicks.
• The charge indicator starts flashing. The indicator
will stay on when the charging is completed.
4. When the charging is completed, remove
the battery pack from the compact power
adapter.
5. Unplug the power cord from the power outlet and disconnect it from the compact
power adapter.
Attaching the Battery Pack
1. Turn the dial to OFF.
2. Push the OPEN switch in the direction of
the arrow to open the battery compartment
cover.
3. Insert the battery all the way into the
compartment and press gently until it
clicks.
4. Close the battery compartment cover.
To Remove the Battery
1. Turn the dial to OFF.
2. Push the OPEN switch in the direction of
the arrow to open the battery compartment cover.
3. Press the BATT.RELEASE latch left and pull out the battery.
4. Close the battery compartment cover.
Charge indicator
CO
PY