Belt Drives Big Fix - Manual

BIG FIX INSTALLATION INSTRUCTIONS
1. Remove stock cage and stock bearings. With grease, coat bearing surfaces of clutch hub and clutch basket.
Place basket over hub and place 3 bearings
at the 6 o’clock position, place 1 bearing each at 3, 9 &12 o’clock position, this will center the clutch basket.
Insert the balance of the bearings from 6 o’clock clockwise and counter clockwise up to 12 o’clock.
There should be a slight space between the
bearings when installed; this is normal.
2. Place nylon shield over bearings.
1