BendixKing KLN 89B - Pilots Guide - Manual (Page 19)

KLN 89/KLN 89B Pilot’s Guide Introduction
v
TO: SEE PAGE:
Create a flight plan ............................................................................4-2
Create a user-defined waypoint at your present position ...............4-31
Create a user-defined waypoint using the radial/distance method 4-33
Create a user-defined waypoint with latitude/longitude..................4-32
Cycle between distance and desired track display on a
numbered flight plan page ................................................................4-4
Cycle between distance, ETE, ETA, and desired track on the
FPL 0 page......................................................................................4-13
Delete a flight plan which is no longer required................................4-7
Delete a user-defined waypoint from the OTH 4 page...................3-65
Delete a waypoint from a flight plan..................................................4-6
Delete a waypoint remark from the OTH 5 page............................3-66
‡Delete an individual waypoint in a SID or STAR procedure.........5-33
Display the nearest airport continuously.........................................3-29
Enable the voltage alert feature ......................................................3-67
Enter a user-defined waypoint remark on the USR 3 page............3-57
Enter a waypoint identifier...............................................................3-13
Enter an airport remark on the APT 6 page....................................3-51
Enter the local magnetic variation manually on the SET 2 page ...4-47
Fly direct to a waypoint ...................................................................3-33
Fly direct to a waypoint in the active flight plan (FPL 0) .................4-12
Initialize the position from the SET 1 page .....................................3-19
‡Perform a manual RAIM calculation .............................................5-28
Recenter the D-Bar by going direct to the active waypoint ............3-35
‡Replace an existing approach, or delete an approach ...................5-9
‡Select a SID ..................................................................................5-30
‡Select a STAR...............................................................................5-31
Select a VOR or NDB by navaid name...........................................3-24
Select a waypoint by identifier from a waypoint page ....................3-21