Cabletron Systems 1088 - Manual (Page 48)

C o n f i g u r a t i o n V i e w s P o r t C o n f i g u r a t i o n - C S I I f P o r t V i e w
S p e c t r u m E n t e r p r i s e M a n a g e r Page 49 S m a r t S w i t c h 6 0 0 0
Port Configuration - CSIIfPort
View
Access: From the Icon Subviews of the SmartSwitch
6000 Interface Icon, select CSIifPort.
This view displays interface-specific MIB
information for the module.
Interface Index
The numerical value identifying the port.
Interface Type
The type of interface for the port (e.g., Ethernet,
FDDI, etc.).
Operation Status
The current operating state of the port. Possible
values are On, Off, or Test.
Admin Status
A button that lets you change the current
administrative status of the port. Possible values
are On, Off, or Test.
IF Description
Allows you to enter a textual description of the
interface.
FddiMAC Device Configuration
View
Access: From the Icon Subviews menu for the Chassis
Device views, select FIDDI Configuration, from the
Icon Subviews menu of the FddiMac Application icon,
select Configuration.
This view provides information on the
configuration and operating status of the
concentrator. The view is divided into two areas,
Station Configuration and SMT Information.
Station Configuration
This area of the FddiMAC Device Configuration
view provides information specific to the FDDI
station.
Ring State
The current state of the FDDI ring. Table 20 lists
the possible states and their descriptions.
MAC Configuration
Displays the actual configuration of the station.
Table 21 lists the possible configuration states and
their descriptions.
Current MAC Path
The ring that this station resides on. Possible
values are Primary, Secondary, Local, or Isolated.