Nikon S6100 - Manual (Page 121)

Mor
e
on
Pla
y
b
a
ck
109
a Creating a DPOF Print Order
Canceling Print Order
• To remove a print marking from an image, display an image selected for
printing in full-frame playback mode, follow the procedure in “Creating a Print
Order for One Image” (
A 106), and tap “0” in step 3.
• To remove print markings from multiple images at a time, remove the print
markings of the desired images in step 2 of “Creating a Print Order for Multiple
Images” (
A 108). Tap n to remove print markings from all images.
B
Notes on Printing Shooting Date and Shooting Information
When the Date and Info options are enabled in the print order option, shooting date and shooting
information are printed on images when a DPOF-compatible printer (
A 196) that supports printing
of shooting date and shooting information is used.
• Shooting information cannot be printed when the camera is connected directly to a printer, via
the supplied USB cable, for DPOF printing ( A 148).
• Note that Date and Info settings are reset each time the Print order is displayed again.
• The date printed is that saved when the image was captured.
Changing the camera’s date using the Date and time or Time
zone setting in the Time zone and date option in the setup
menu after an image has been captured has no effect on the
date printed on the image.
D
Print Date
When shooting date and time are imprinted on images using the Print date option ( A 157) in the
setup menu, images are saved with shooting date and time imprinted on the image when they are
captured. Images with the date imprinted on them can be printed from printers that do not support
printing of the date on images.
Only the date and time imprinted on images with the print date option will be printed, even if the
Print order date option is enabled.
15.05.2011 15.05.2011 15.05.2011