Magliner PADDLE BRAKE WINGS - Manual

1
TOOLS REQUIRED
• (1) #2 PHILLIPS SCREWDRIVER
• (1) 7/16" WRENCH OR SOCKET WRENCH
• (1) HAMMER
ADDITIONAL TOOLS REQUIRED IF
RETROFIT TO EXISTING TRUCK
• (1) ELECTRIC DRILL
• (1) 5/16" DRILL BIT
ITEM DESCRIPTION QTY. PART NO.
A RH 45" paddle brake truck wing 1 3041678
B LH 45" paddle brake truck wing 1 3041677
C 1/4"-20 x 3/4" long pan head screw 2 80256
D 1/4"-20 x 1-1/4" long pan head screw 2 80104
E 1/4"-20 locknut 4 80675
NOTE: Excess hardware included in kit. Please use chart below to determine correct screws for your
handle choice.
F Handle Screws (all handles except double loop): To be used with:
1/4"-20 x 1-7/8" long pan head screw 4 80039 Handle only
1/4"-20 x 2" long pan head screw 4 80107 Handle with universal brace or Hi-U
1/4"-20 x 2-1/4" long pan head screw 4 80263 Handle with universal brace and Hi-U
F Double Loop Handle Screws:
1/4"-20 x 1-7/8" long pan head screw 2 80039
1/4"-20 x 2" long pan head screw 2 80107
FIGURE 1
A
B
C
D
E
Middle hole
location
Bottom hole
location
Top hole
location
Paddle Brake Truck Wings
Magline, Inc., 1205 W. Cedar St., Standish, MI 48658 • (800) 624-5463 • (989) 512-1000 • www.magliner.com