Magliner STATIONARY KEG HOOK User Manual

Keg hook installation instructions, Parts list

Advertising
background image

Parts List

instaLLation instructions

1. Position the keg hook as shown in the illustration.
Note: Make sure to position the keg hook so that the mounting channel is on the bottom of the middle cross

brace on a standard hand truck (Figure 1). For folding hand trucks, be sure to position the keg hook so that the

mounting channel is on top of the middle cross brace (Figure 2).

2. Insert the bolts through the opening in the channel into each of the mounting holes on the middle cross brace and

follow with the washer and the lock nut on the oppostie side. Tighten with the two 1/2" wrenches.

tooLs rEQuirED

• (2) Standard 1/2”

wrencheS

FIGUre 2

kEg hook instaLLation instructions

standard hand truck

Folding hand truck

a

a

FIGUre 1

itEM

DEscriPtion

QtY. Part no.

a

Keg hook (includes below)

1

301121K

B

hex head cap screw 5/16-18x1-3/4"

2

80014

c

Flat washer 5/16"

2

80701

d

hex lock nut 5/16"-18

2

80676

B

c

d

d

c

B

Advertising