To set the correct time – Panasonic RCX160 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
m-
To Set the Correct Time
To set the correct time on the clock display,
use the following procedure.
Connect the AC power cord to
your household AC power out
let.
The clock display will begin to flash
continuously.
While pressing the ohf/time set
button, press and hold the time
set
buttons
until
the
correct
time appears on the clock dis
play.
The digits should stop flashing.
To forward or reverse the displayed
time rapidly, press and hold the FAST
button with the FWD or REV button.
To forward or reverse the displayed
time minute by minute, press the
FWD or REV button repeatedly.
The seconds are automatically set to
“
0
" when the FWD or REV button is
pressed.
Observe the PM indicator. A green
dot (PM indicator) indicates "PM" and
no dot indicates “AM".
The correct time can usually be obtained
by listening for time checks on the radio or
from telephone time services.
The time set (REV-FAST-FWD) buttons
can only activate when the off/time button
is pressed.
if