Panasonic SA-AX6 - Manual (Page 16)

Bl-AMP : VOLUME'
SUBWOOFER
LEVEL
POWER
-—SPEAKERS—-
□ □ □
SPEAKERS^ nlinraaan
INPUT SELECTOR
Selected source
B
VOLUME
MIN MAX
Before operation, set VOLUME to the “MIN” position.
Press POWER.
Basic operations
Press A and/or B, or to select the
speaker system(s) to be used.
A, B and
of the unit.
When
nate.
m refer to the speaker terminals at the rear
is selected, the Bi-AMP indicator will iliumi-
If the button is pressed once more, the indicator will switch off
and no sound will be heard from the speakers.
and B cannot both be used at EIHandA, or
the same time.
The BI-AMP indicator goes out if a Dolby Pro Logic or SFC
mode is turned on or if the DVD 6CH INPUT mode is select­
ed.
Turn INPUT SELECTOR to select and start
the desired source.
{Refer to the appropriate operating instructions for details.)
The indicator which corresponds to the selected input source
will illuminate.
The selected source and “INPUT" will be shown on the dis­
play,
VCR 1: To watch video tapes {VCR 1)
TV/VCR 2; To watch TV or video tapes {VCR 2)
VCR 3: To watch video tapes (VCR 3)
DVD: To watch DVD
TAPE: To listen to cassette tapes
CD: To listen to compact discs
TUNER: To listen to radio broadcasts
PHONO: To listen to phono discs
!f a Dolby Pro Logic or SFC mode has been select­
ed
After displaying the selected source, the display will then
change to show the Dolby Pro Logic or SFC mode and
“INPUT” will go out.
If the source chosen was TUNER then the display will change
again to show the frequency.
iCTsa
To watch a video {or DVD) or the TV, set the TV to either the
TV mode or VIDEO mode.
For your reference
If you are using VCR and you select TAPE, CD, TUNER, or
PHONO, the picture will remain on the screen.
Adjust the volume level.
If using a subwoofer, adjust its volume with SUBWOOFER
LEVEL.
If the subwoofer isn’t being used, be sure to set SUB­
WOOFER LEVEL to MIN.
After listening is finished
Be sure to reduce the volume level, and switch the power to the
standby condition by pressing POWER,