Panasonic SA-AX6 - Manual (Page 20)

Lisfenirtg to radio broadcasts
I
,o
A
s
O
-FM MODE
INPUT SELECTOR
/ t I n I J _ l _ J
/ t f f ^ L. f 1
/ n/i tn 1 /”//“/ :
1 f / A Z) HHi
Selected band
Use the tuning buttons to tune-in radio stations.
Turn INPUT SELECTOR to select TUNER.
Press -BAND to select “FM” or “AM”.
B Press TUNING (V) or (A) to tune to the
desired frequency.
“TUNED” lights up when tuned.
“STEREO” lights up when an FM stereo broadcast is
received.
To make an automatic search for stations
If TUNING( V) or (A) is held down for an instant until the fre­
quency begins to scroll, the broadcast stations are tuned in
automatically when one is found.
Tuning may stop automatically if any jamming is encoun­
tered.
If noise is excessive in the FM stereo mode
Press and hold -FM MODE for 2 seconds.
(“STEREO” will go out, and "MONO" will light up)
The broadcast will be monaural, but noise will be reduced.
If the button is pressed and held for 2 seconds once more, the
stereo mode will be resumed.
To change the AM frequency step
Press and hold -BAND for about 3 seconds when AM band is
selected.
(The frequency step changes to 10 kHz per step.)
To return to the previous step, press and hold -BAND for about 3
seconds again.
TIJMING
A
TUNED ¡1/1
STEREO ""
7 / / / 11 1
/ / / uu. t L_/ «iHi