Important safeguards, Identification of parts and dismantling – Panasonic MJ-66PRA User Manual

Page 2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

IMPORTANT SAFEGUARDS

IDENTIFICATION OF PARTS AND DISMANTLING

When using electrical appliances, basic safety precautions should always be followed
Including the following:

1. READ ALL INSTRUCTIONS BEFORE USE.

2. To protect against risk of electrical shock, do hot put Motor Housing in water or

other liquid.

3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug from outlet when not in use, before putting on or taking off parts and before

cleaning.

5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance

malfunctions, or is dropped or damaged in any manner. Return appliance to the
nearest authorized service facility for examination, repair or electrical or mechanical

adjustment

7. The use of attachments not recommended or sold by the appliance manufacturer

may cause fire, electric shock or injury.

8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or touch hot surfaces.

10. Do not overload motor with extra heavy loads.
1

1

. Always make sure Container Cover is clamped securely in place before motor is

turned on. Do not unfasten Clamps while juice extractor is in operation.

12. Be sure to turn Switch to OFF position after each use of your juice extractor.

Make sure the motor stops completely before disassembling.

13. Do not put your fingers or other objects into the juice extractor Feeder Opening

while it is in operation. If food becomes lodged in Feeder Opening, use Food

Pusher or another piece of fruit or vegetable to push it down. When this method is
not possible, turn the motor off and disassemble juice extractor to remove the

remaining food.

14. Always place a bowl, glass or cup under the spout.
15. Never wash the parts in hot water or expose them to excessive heat.
16. Do not wash washable parts in a dishwasher.
17. Do not assemble when there is food residue left around the base of the Strainer or

Container.

18. All parts must be clean. Food particles left may cause odors, stains or prevent the

Strainer from functioning properly.

19. This appliance is intended for home use only and not for commercial or industrial use.

20. Do not place appliance on or near hot gas or electric range.
21. To disconnect, grip plug and pull from wall outlet. Never pull on cord.
22

.

Make sure Strainer is completely stopped before removing Cover.

23. Never leave room while appliance is running.
24. This appliance should be used only for its intended use as described in the

instruction manual.

25. If the supply cord of this equipment is damaged,it must be replaced by the special

cord i Part N0.AJAO5R123).

26. The appliance is not intended for use by young children or infirm persons without

supervision.

^

27.

Young children should be supervised to ensure that they do not play with the appliance.

Food Pusher

Cleaning Brush

Feeder Opening

Opening for Brush

Container Cover

Strainer

TO DISMANTLE

1. Release Clamps as arrows indicate.

2. Lightly lift up the Container. The Strainer will come

with it.

3. Remove the Container Cover.
4. The Strainer can be easily removed from the

Container by lifting it out by the edges.

5. Remove the Spout Cover and clean the spout.

Be sure to snap the Spout Cover completely back
into place before using.

6. After dismantling each part, wash it in cold or

lukewarm water except the Motor Housing.

- 2 -

Advertising