Panasonic KX-T7885 - Manual (Page 11)

G
etting
S
tarted
( C ontrolling the V olume
Ringer Volume Adjustment
The ringer volume has three levels (low / middle / high). Moreover, you can
select the Step Ringer mode, Vibrator mode or Off mode. [Default: middle]
Press 0 or g repeatedly to select the desired
mode.
• Step Ringer mode: Rings progressively louder.
• Vibrator mode: The handset does not ring but
vibrates.
• Off mode: The handset does not ring or vibrate.
Only the indicator flashes green.
Ringer Volume
=High
High
Ringer Volume
=Middle
Middle
Ringer Volume
= Low
Low
Ringer Volume
=Step
Step Ringer mode
Ringer Volume
=Vibrate
Vibrator mode
Press 0 for more than
2 seconds.
Ringer Volume
=Off
Vibrate
FI F2 F3 F4
I Ringer OFF
I FI F2 F3
F4
Off mode
N
ote
:----------------------------------------------------------------------------------
- If you select Vibrator mode, the display will show
“Vibrate” while the handset is idle.* *
- If you select Off mode, the display will show
“Ringer OFF” while the handset is idle.*
*This is unavailable when FWD/DND is set.
This information will not display in the following cases:
• While LCD shows your extension number or time
• While LCD shows duration time after finishing the conversation
- When charging, the handset always rings for incoming calls (except in Off mode).
- In addition to the above, the Vibrator and Ringer mode (vibrates several times
and then starts to ring) is available. Refer to “Vibrator and Ringer” in Handset
Programming (see page 28).
- When you set @ and 0 to “F-Key Select”, you can select ringer volume by
pressing ( func ) first, then 0 or 0 (see page 29).
11