Press [dit deck 2 open] and insert the tape, And |sc-ak22: russia and ukraina| only, Press [rev mode] to select the reverse mode – Panasonic SC-AK52 EN User Manual

Page 22: Press [• rec^top] to start recording, K^oriiing from radh broadcasts

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

k^oriiing from radh broadcasts

Wind up the leader tape so recording can begin immediately.

Press [dit DECK 2 OPEN] and Insert the tape.

Close the holder by hand.

B

SC-AK52|^C

p

AK4^

and |SC-AK22: Russia and Ukraina| only

Press [REV MODE] to select the reverse mode.

Every time you press the button:

L

“Z

One side, only, records.

: Both sides record (front side reverse side),

"automatically changes to “

” when [•REC/STOP] is

pressed.

Select a radio station. Perform steps

D

through

Q

on page 12.

Press [• REC^TOP] to start recording.

To stop recording

Press [• REC/STOP] again.
Recording can also be stopped by pressing P].

To record from a specific point on a tape

Before recording, advance the tape to the point frcwn where you want

to start recording.

To cut an unnecessary part while recording

1. Press [• REC/STOP] during tiie unnecessary part. The cassette

deck will go into the stop mode.

2. Press [• REC/STOP] to resume recording again. Recording wiil

continue in the same direction as before.

SC-AK52

ISC-AK22: Russia and Ukrafnaj

To start recording on the reverse side

Load a tape and change fie tape direction as follows:
1. Press [TAPE, DECK 1/2] and select tape deck 2.

2. Press [-^/

II]

and immediately thereafter

p].

The tape direction

will be shown as

(SC-AK22: except Russia and Utorainal

To record on the other side of the tape
Turn the tape over and press [• REC/STOP].

When recording an AM broadcast, sound is momentarily interrupted
when you start and stop the recording.

|

h

To reduce noise while AM recording (Beat proof
function)

Press IHh4/-4^, FM MODE/BP] while recording.
Each time you press the button, “BP1” and "BP2” wiil be displayed
alternately.
Select the position where fiere is less noise.

Advertising
This manual is related to the following products: