24 v ac power supply, Video cable – Panasonic WV-CPR650 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. 24 V AC Power Supply
Connect the power cable to the AC/DC compatible
input terminal on the rear panel of the camera.
OC t!V AC 24V
24 VAC, 60 Hz
{19.5 V-28 V)
Video Cable
1. It is recommended to use a monitor whose resolu
tion is at least equal to that of the camera.
2. Set the termination switch to the 75Q position on
the last monitor.
A. Use a 75ii coaxial cable.
B, Set the termination switch to the 75Q position
on the last monitor and to the Hi-Z position on
the other monitors. Do not change the posi
tions after setting.
Recommended wire gauge sizes for 24V AC line.
Copper wire
size (AWG)
#24
(0.22mm^)
#22
(0.33mm^)
#20
(0.52mm4)
#18
(0.83mm=)
Length
of Cable
(Approx.)
(m)
95
150
255
425
(ft)
314
495
842
1 403
Caution:
To prevent fire or electric shock hazard, a
UL listed wire {VW-1, style 1007) should be
used for the cable.
Monitor
© © B
Monitor
VIDEOS
© @ H
The maximum extensible coaxial cable length
between the camera and the monitor is shown
below.
-8-