Opening the setup menu, Editing the cam set up and rs485 menu – Panasonic WV-CPR650 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
* Opening the Setup Menu
Press and hold down E] for a second or longer.
to display the desired setting menu.
Check the current settings on the menu.
The SET UP menu appears on the monitor as shown
above,
• Editing the CAM SET UP and RS485 Menu
Important Notices:
When the words SET UP DISABLE appear on the
bottom line of the SET UP menu, you cannot
change the currently active settings. This is to pre
vent accidental changing of the settings.
To edit the SET UP menu (change settings), use
and or d and to move the cursor to SET UP
DISABLE in the bottom line.
Press ED. SET UP DISABLE changes to SET UP
ENABLE. Move the cursor to END, then to the item(s)
you want to change.
Move the cursor to CAMERA or RS485, then press El
-
19
-