Panasonic WV-CPR650 User Manual

Page 23

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

S

etting

procedures

• RS485 Set Up

You can remote control this camera by using a speci­
fied extension unit such as computer with a modem.
The RS485 menu is used to set the parameters of the

items for RS485 site communication below.

Move the cursor to RS485 of the SET UP menu and

press El. The RS4S5 menu appears on the monitor

screen.

Illustration of RS 485 menu

UNIT NUMBER

This item is used to select the camera number that is

used with RS485 communication.

1. Move the cursor to the parameter of UNIT NUM­

BER.

2. Select the camera number to be used with RS485

communication and press .

BAUD RATE

This item is used to select the transmission speed tor

the RS485 communication. (BAUD is the unit of bit per
second.)

1. Move the cursor to the parameter of BAUD RATE.

2. Select the transmission speed and press El.

DATA BIT

This item is used to select the data bits for the RS485

communication.

1. Move the cursor to the DATA BIT parameter.

2. Select the data bits and press EH.

PARITY CHECK

This item is used to select the parity for the RS485

communication.

1. Move the cursor to the PARITY CHECK parameter.

2, Select the parity and press O ■

STOP BIT
This item is used to select the stop bit for the RS485

communication.

1. Move the cursor to the STOP BIT parameter.

2. Select the stop bits and press El.

X ON/X OFF

This item is used to select applying the flow control or

not.

1. Move the cursor to the X ON/X OFF parameter.

2. Select NOT USE (not apply flow control) or USE

(apply flow control) and press El ■

-21-

Advertising
This manual is related to the following products: