To edit the camera id, Camera identification (camera id) setting – Panasonic WV-CPR650 User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

You can use the camera identification (CAMERA ID) to
assign a name to the camera. The camera ID consists

of up to 16 alphanumeric characters. You can select
whether to have the camera ID displayed on the moni­

tor screen or not.

1. Camera Identification (CAMERA ID)

Setting

Character Cursor

r

**

CAM SET UP **

CAMERA ID

ALC/ELC

AliC 1

SHUTTER

AGC

ON

SENS UP

OFF

SYNC

INT

WHITE BAL

ATW "1

MOTION OET

OFF 1

LENS DRIVE

DC

RET

V__________

>

To edit the CAMERA ID

1. Move the cursor to the CAMERA ID parameter.

2. Press El - The CAMERA ID menu appears. The

cursor on the letter “0" starts blinking.

Pointer-------- 1

^1.23456789

ABCDEFGHI JKIiM
NOPQRSTUVWXYZ

+-*/%$

SPACE
POSI RET END RESET

■Character

Area

- Command

■Editing

Area

CAMERA ID menu

3. Move the cursor to the character you wan: to

change by pressing d / [^ / £®i /

4.

After selecting the character, press El. The

selected character appears in the editing area.

(The pointer in the editing area moves to the right
automatically at this moment.)

5. Repeat the steps above until all characters are

edited.

To enter a blank space in the CAMERA ID

Move the cursor to SPACE and press El.

To edit a specific character in the CAMERA ID

1. Move the cursor to the editing area by pressing

Ce?

-23-

Advertising
This manual is related to the following products: