For caller id service users (p. 32), For call waiting service users, For caller id service users – Panasonic KX-TG2670N User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Press E (Save key).
•The unit announces the day/time. The clock starts working.
•If 6 beeps sound, the setting is not correct. Start again from step 5.
•To return to the standby mode, press
[OFF].
*ln step 7, you cannot enter numbers greater than 12.
Do not use military time.
(To set 13:00 hours, enter “0100”, and select “PM” by pressing 0 )
If a power failure occurs, the adjusted day/time will be erased. Readjust
the day/time.
For Caller ID service users
(p. 32)
•The Caller ID information will re-set the clock after the first ring if the adjusted
time is incorrect. However, the day will not be re-set. Set the day following the
procedures on pages 22 and 23.
•If the time has not previously been set, the Caller ID information will not adjust
the clock.
•The Caller ID information will automatically adjust the clock for daylight saving
time.
23