Panasonic KX-TG2670N - Manual (Page 38)

Using the Caller List
Storing Caller List Information in the Directory
You can store names and phone numbers that are in the Caller List into
the directory. You can also turn the call group feature on for certain
callers (p. 41).
Storing must be carried out with the handset.
Make sure the unit is in the standby mode initialiy.
1
2
Press ® or ® to enter the Caller List.
Press ® or ® repeatedly to find the
caller you want to store in the directory,
and press ® (Yes key).
•If the number requires editing, see page 36.
Press ® or ® to select “save
directory”, and press © (Yes key).
If there is no name information for the
caller, “Enter name” will be
displayed.
a) If a name is not required, press ®
(Next key) twice.
b) If a name is required, enter the name
(p. 44). When finished, press ®
(Next key) twice.
To turn the call group feature on, select
“On” by pressing @ or ®.
If not required, select “off”.
(See page 43, from step 7.)
10 new calls
TA ^=01rectory
CINDY TURNER
1-234-456-7890
11:20A JAN. 12 X3
► Edit
Save directory
TA ►=Yes
Edit
►Save directory
TA
►=Yes
Enter name
T=Next
^_______
Enter name
CINDY TURNER
4^ T=Next
OP
Set group
:Off
4^ T=Next
•You can exit the programming mode any time by pressing fOFF).
•If the display shows
“Directory full” in step 3, press [OFFi to exit the list.
To erase other stored items from the directory, see page 49.
•You cannot store caller information in the directory if a phone number is not
displayed.
•If'3 beeps sound and the display shows “save error", move closer to the base
unit and start again from step 1.
38